A full size replica of the rear wing end plate from Damon Hill's 1998 Jordan 198 car. The plate has all relevant sponsors and drill holes so looks very authentic. It has been signed by both the 1998 Jordan drivers, Damon Hill and Ralf Schumacher. The wing is in very good condition with a few minor marks, would be perfect for framing and displaying.
Reference: CP-JOR198RWEPREP-01
An original Lotus E21 carbon fiber engine cover panel with wishbone exit vent. The cover has the original team car part number stickers to the reverse. The E21 car was driven by Kimi Raikkonen and Romain Grosjean in the 2013 F1 season and proved fairly successful with one race win and nineteen podium finishes. The panel measures approximately 19" x 13.5" (at the widest points) and is in good race used condition with the expected marks. Reference: CP-LOTE21ENGPAN-09
An original rear wing end plate from the 2006 Williams FW28 of Nico Rosberg. The end plate has all relevant sponsors and the original team part number and is in excellent condition. The plate has been signed to the front by Rosberg is silver marker, this would make a very impressive display piece.
Reference: CP-FW28RWEPSIG-01
A factory issue full size replica of the 2022/23 Alpine F1 steering wheel mounted on a display stand. Being a replica is it not carbon fiber with no electronics and the buttons are not functional but the dials are movable and the paddles at the rear are spring loaded so can be pressed. This steering wheel was given as a gift so is not available to purchase in the shops, a very nice item ready for display.
Reference: CP-ALPEPSTRW-01
An original used wheel nut from the 2025 Williams FW47 race car. The nut has been signed to the side by the two Williams drivers. Alex Albon and Carlos Sainz.
Reference: CP-FW47NUTSIG-02
An original wheel nut as used on the 2015 Mercedes F1 W06 car as driven by Lewis Hamilton and Nico Rosberg. The performance of the F1 W06 Hybrid was one of the most dominant in any F1 season taking 16 race victories, 32 podium finishes and 13 fatstest laps. The Mercedes team won the constructors title and Hamilton clinched his third drivers title. The wheel nut has the expected scratches etc from race use and the relevant team serial numbers are clearly visible.
Reference: CP-MERW06NUT-04
An original front wheel rim from the 2008 Red Bull RB4 car of Mark Webber which still has it’s unique reference number. The rim has been wrapped in carbon fiber effect vinyl with images of Mark Webber, Monaco and Ayrton Senna. It is supplied with a circular glass table top which does have some minor marks and scratches and interior LED lighting which makes a very attractive display piecea. The rim itself has been race used so does have the expected marks and wear.
Reference: CP-RB4FRRIMTB-01
An original windshield from the Stewart Ford SF3 car of Rubens Barrichello as used at the inaugural 1999 Malaysian GP. The Brazilian driver finished in a repsectable fifth place which could have been a podium finish if the Ferrari drivers disqualification from first and second place had been upheld due to infringement on their bargeboards. It was also the return of Michael Schumacher after breaking his leg at the British GP earlier in the year.
Reference: CP- CP-RBMAL99WSSIG-01
An original rear wing end plate from the 2006 Red BUll RB2 car as driven by David Coulthard, Christian Klien and Robert Doornbos (last 3 races). The wing is in excellent condition with the expected marks from race use.
Reference: CP-RBR02RWEP-01
An original carbon fiber barge board from the 2017 Haas VF-17 car as driven by Kevin Magnussen and Romain Grosjean. The board has some very interesting aerodynamic designs with Alpinestars sponsor logo to the front. The part is in very good condition with marks and some imperfections from race use. Dimensions at the widest points measure approximately 37"(L) x 14"(H) x 6"(W)
Reference: CP-HAAS17BBRD-01
An original right side rear wing end plate from the 1990 Lotus 102 car as driven by Derek Warwick. The wing has Goodyear branding along with Warwick’s no.11 race number. In overall excellent condition, the wing shows signs of race use to the front and reverse. Dimensions at the widest point measure 27″ x 20″.
Reference: CP-LOT102RWEPR-01
An original OZ Racing front wheel rim from the 1987 Lotus 99T car as driven by Ayrton Senna and Satoru Nakajima of which the Brazilain driver took two race victories and six other podium finishes in the 1987 season. The rim has the air valve and balancing weight still present with Lotus name to the front and side and various details written about year and spec. In overall very good condition with the expected signs of race use and age. Dimensions measure 30" x 14".
Reference: CP-LOT99TFRIM-01
An original rear wing end plate (right side) and corresponding outer winglet from the 1984 JPS Lotus 95T car, the same specification as used at the Belgian GP. The car driven by Nigel Mansell and Elio de Angelis was fairly successful and Lotus finished third in the 1984 constructors championship with de Angelis finishing third in the drivers championship. Both the rear wing end plate and the winglet are in very good race used condition with the expected scrapes and marks from being affixed to the car. Dimensions of the rear wing plate measure 96cm x 41cm and the winglet 36cm x 30cm (at the widest points).
Reference: CP-LOT95TRWEPLET-01
An original used carbon fiber front winglet from the 2012 Caterham CT01 car as driven by Heikki Kovalainen and Vitaly Petrov. The winglet is in excellent condition and measuress approximately 47cm x 25cm (at the widest points)
Reference: CP-CAT12FWLET-01
An original used carbon fiber engine cover panel from the 2012 Caterham CT01 car as driven by Heikki Kovalainen and Vitaly Petrov. The panel has the exhaust outlet built into it and this area has visible signs of heat exposure with peeling to the black coating. The reverse of the panel has heat resistant shielding with adhesive thermometer strips stuck in various positions. The part measures a relatively large 76cm x 60cm (approximate measurements at the widest points) and would make an impressive display piece. Reference: CP-CAT12ENGCV-02
An original Sahara Force India paperweight consisting of a small cut of original bodywork from the 2017 ‘Pink Panther’ VJM10 car as driven by Sergio Perez and Esteban Ocon. This small section of bodywork is mounted in a perspex block with Sahara Force India logo and a description of the part. The item comes supplied in a gift box with Sahara Force India logo to the lid. Dimensions of the perspex block measure 90mm in length, 70mm in width and 25mm thickness. Reference: CP-VJM10PRWHT-07
An original windshield from the Stewart Ford SF3 car of Rubens Barrichello as used at the 1999 French GP. Barrichello qualified for the race in with a very impressive pole position and finished the race on the podium in third place. The windshield shows signs of race use and has been signed and dated with race name by Barrichello.
Reference: CP-RBFRC99WSSIG-01
An original DRS wing from the 2012 Williams FW34 car as driven by Bruno Senna and Pastor Maldonado with the latter taking the race victory at the 2012 Spanish GP. The wing is in excellent condition with relevant sponsor and measures 28" x 4.5".
Reference: CP-WILLFW34DRS-01
An original carbon fiber rear wing end plate as used on the Jaguar R1 car from the 2000 F1 season. The wing has all relevant sponsors and shows signs of race use. The R1 was the first Jaguar badged car after Ford's purchase of the Stewart team the previous year and was driven by Eddie Irvine and Johnny Herbert.
Reference: CP-JAGR1RWEP-01
An original carbon fiber rear wing end plate from the Mclaren MP4/15 car as driven by Mika Hakkinen and David Coulthard in the 2000 F1 season. The plate is in excellent race used condition with all relevant sponsors and has been signed by David Coulthard in silver marker. The MP4/15 car proved highly competitive and scored seven victories just like its predecessor the MP4/14, but was narrowly beaten to both the Drivers' and Constructors' championships by the Ferrari F1-2000.
Reference: CP-MCL00RWEPDC-01
OUT OF STOCK
An original carbon fiber race seat made specifically for Kevin Magnussen whilst driving for the Renault F1 team in 2016. The seat has all relevant fittings including belts and is in very good condition. It is supplied with a certificate of authenticity from F1 authentics.
Reference: CP-KMAGREN16ST-01
An original App Tech rear wheel rim complete with a rare Pirelli Cinturato Blue full wet weather tyre from the 2016 Williams Martini Racing FW38 car as driven by Valtteri Bottas and Felipe Massa. The rim has original reference numbers, air and pressure valves still present. The rim has been used so does have the marks to be expected from being raced at 200mph. The Pirelli Cinturato tyre is in excellent condition and has it's original FIA barcode label present. This complete wheel would make an excellent display piece. Reference: CP-WILLFW38WHLWW-01
OUT OF STOCK
An Alcantara motor racing steering wheel with red stitching and Ferrari Cavallino shield that has been signed in silver marker by Nigel Mansell along with his famous car number ‘Red 5’. This superb display piece comes with a perspex display stand and a certificate of authenticity from the original supplier showing Mansell at the signing session. Reference: CP-STEWFERNMREP-06
An original carbon fiber side pod section from the 2013 Sahara Force India VJM06 car as driven by Paul di Resta and Adrian Sutil. It was a reasonable season for the Force India team with both the drivers and the team itself finishing midway in the drivers and constructors championships. This impressive race used VJM06 side pod has colourful team livery and has been race used, it does have some dents and scratches (shown in photos) and the tower wing has been removed. This would make a superb display and conversation piece. Approximate dimensions are 100cm x 43cm x31cm. Reference: CP-VJM06SIDEPOD-03
OUT OF STOCK
An original front wheel rim from the 2009 Red Bull RB5 car which still has it's unique reference number. The rim has been race used so has some marks etc as to be expected from a used car part but it is in excellent condition. The RB5 car gave the Red Bull team its first pole position, first win and first ever 1–2 finish at the 2009 Chinese Grand Prix. Over the course of the season the car turned out to be competitive as it won 6 out of 17 races with Vettel winning four races and Webber winning two. As a result the team finished 2nd in the constructors' championship standings behind Brawn GP and Vettel finished second in the drivers' standings behind Jenson Button. Reference: CP-RB5FRRIM-02
OUT OF STOCK
A really superb piece of engineering design is this original left side rear wing end plate off the 2013 Sahara Force India VJM06 car as driven by Paul di Resta and Adrian Sutil. This impressive wing has all the relevant logo's as used in the 2013 season and to the reverse is the team serial number and some sensor wiring. The wing is large and measures 84.5 cm x 65cm at the widest points.
Reference: CP-SFIRWEP13R-01
OUT OF STOCK